014-1064-030 - Follower plate for pumps with shank 30 mm subgroup-Schuim drukvaten in AISI 304 of AISI 316 Warning: with stainless steel pressure

Warning: with stainless steel pressure sprayers AISI 316 can be used also corrosive liquids compatible with the materials using on the article

the direct application to the pump tank

Pratical and economical

avoiding grease flow interruptions by air pockets in the grease bed

Deze set mag u gebruiken in de werkplaats zonder gebruik te hoeven maken van een lekbak

014-1064-030 - Follower plate for pumps with shank 30 mm subgroup-Schuim drukvaten in AISI 304 of AISI 316 Warning: with stainless steel pressureIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.